I am a professional laptop and computer troubleshooter, tech editor who loves to talk about technology and software. My passion is electronics devices. Follow me...Read more
While using your desktop computer for a prolonged time can sometimes develop issues due to overuse. So, if you frequently work on your dell desktop computer, you might want to check out the health of your computer. One issue to be mindful of is when the Dell monitor keeps going to power save mode. But, what can cause this?
Usually, if your Dell monitor keeps going to power-saving mode as it boots, then it’s from a drained motherboard battery. This battery is flat and round and resembles a wristwatch battery, but larger. You will need to replace the battery DIY.
In this article, we have discussed every issue related to a Dell monitor constantly going to power-saving mode. Also, we have outlined the solutions for such issues. Stick around; let’s solve your problem together.
What Causes Dell Monitor To Go Into Power Saving Mode
Usually, a Dell monitor will enter into power saving mode after staying inactive for an amount of time. Rather than displaying a screensaver, the monitor will completely blackout. While this doesn’t imply that your computer has turned off, it shuts down the monitor until you need to use it again.
By yourself, you can program/set how much time should elapse before the monitor enters into power-saving mode by modifying your display settings. One of the main causes of computer problems is when the computers are overused. This is most common among individuals who work a lot with their computers. Sometimes, you may be using your computer to work, and the monitors automatically turn off.
So, as we have advised, if you’re a proactive worker on your computer, ensure to prioritize the computer’s health as often as possible. This will guarantee your computer a long-lasting time. Some high-end and affordable Dell monitors include Dell SE2422HX – 23.8-inch FHD, Dell E2220H 22″ LCD Anti-Glare Monitor, and Dell SE2216HV 22″ Screen.
Typically, when your Dell computer goes into power-saving mode, by clicking any key on your keyboard, it will awake, and you’d be able to use it. Alternatively, when pressing any key doesn’t work, you can press the power button on your computer to retrieve it from power-saving mode. This will move the computer from Power Saving mode to Standby mode, enabling the computer to display screensavers on the monitor. When the Standby mode appears, you can now log into the computer by inputting your password or pin (if there’s any).
However, you can prevent your Dell monitor from entering into the Power Save mode before time. To do this, you’d need to modify the display settings of your Dell monitors in the Control Panel. On your desktop, right-click any blank space on your screen and navigate to the “Properties” option. Scroll down to the “Screensaver” option and click on “Power.” Besides the “Turn off monitor” button, then select a time segment from the list of available options.
Dell Monitor Keeps Going to Power Save Mode
In a scenario where your Dell monitor keeps going to power save mode, there are several reasons for this. But usually, this can be because of a faulty motherboard battery (CMOS battery). Alternatively, your computer does this because it hasn’t received sufficient power. This usually happens in older computer models. You can solve this problem by replacing the motherboard battery, and we’d talk about that in the following segments.
Also, asides from the CMOS battery and power issues, there are other possible reasons why your Dell monitor can go to Power Saving mode automatically. These reasons include faulty RAM, video cables not connected properly, and faulty CMOS battery configuration.
If your computer frequently enters into Power Saving Mode, it’s most probably because of a drained CMOS battery. Let’s look at the solution for this in the section below.
How Do I Fix My Monitor From Power-saving Mode on Startup?
To fix your monitor from getting stuck in power-saving mode, then you first need to know the reason behind its freezing. As we’ve seen earlier, if your monitor constantly keeps going into power-saving mode when you turn on your computer, it’s most likely because of a drained CMOS battery. All you need to do is to insert a new battery. But, it’s important to confirm that the other components in your computer are set properly and not faulty.
Below, we have explained briefly how to replace your CMOS battery properly. Let’s proceed.
- Disconnect every cable connected to your Dell desktop computer except its power cable. To deter distractions, mark the locations for each cable so you can easily connect them back.
- Unplug the power cable, then press the power button on your computer.
- Unscrew the casing of the computer. Then, slide back the upper panel and remove it.
- You’d find the CMOS battery resembling a large wristwatch battery (usually flat, round, and large). To avoid distractions, mark the side facing up.
- Then, it’s time to replace the new battery. Insert the new CMOS battery into the position of the former one. It’s important to install the new CMOS battery in the same position as the old one, as installing it wrongly can cause the battery to explode.
- It’s time to cover the casing of your computer’s CPU. Slide the cover back and fasten its screws. Plug the power cable and others back into your computer and power it on. This will solve the problem of Dell monitor keeps going to power save mode.
How Do I Get My Dell Monitor Out of Power Save Mode?
You can disable the power saving mode on your computer as often as you wish. All you need to do is to locate your Power Saving settings in the Advanced Power Options section in your computer’s Control Panel. Here, in this section, we’ll show you how to do so below.
At the bottom of the background, click on the battery icon. Then choose the “Battery Settings.”
- There is an option in a pop-up video prompting whether to automatically turn on the battery saver when the power drops below. Untick the option.
- Also, you can disable the power saving option when your charger is connected to the laptop. Simply navigate to Control Panel and then “Power Options” on your computer.
- On the left side of the screen, select the “Create a Power Plan” button. Then, select the option called “High Performance” and rename it to whatever you wish/
- Now, it’s time to edit the power settings. When you’re done creating a power plan, navigate to “Edit Plan Settings”. Then, select “Never” in both “Plugged in” and “Battery Mode.” Once you’re done with that, choose the “Create” button.
- Then, enter the “Change Plan Settings” section beside the new power plan you’ve created.
- Enter the “Change Advanced Power Settings” section to open another window. Then, click on “Hard Disk” to expand the option. The computer will prompt you with an option displaying how long you want it to take before turning off the hard disk. Then, select Never in both “Plugged in” and “On battery” modes. When you’re done with that, click on the “Apply” option and “Ok.”
How to Fix the Power Saving Mode Problem
Conversely, your Dell computer might be facing software issues or problems related to the settings and configurations. If that’s the case for you, then worry no further. Follow these steps to quickly solve your challenge.
- Go to the Start menu on your computer. Alternatively, you can press the Windows key on your computer keyboard to open it.
- Once it pops up, search for Power Options in the search bar at the bottom of the screen. Then, head over to the “Change Plan Settings” section. When you double-click on it, it will open a window called “Edit Plan Settings.”
- It will pop up two options are known as “Put the computer to sleep” and “Turn off the Display.” Select the option “Never” from the dropdown menu. Additionally, in both “Plugged in” and “On Battery” options, select “Never.”
In this short video, HiDe Graphics exchanged how to solve the problem of your monitor entering power-saving mode.
How to Fix Dell Monitor Stuck in Power-saving Mode
Most times, the reason why a Dell monitor can freeze in power saving mode is because of a faulty motherboard, loose video chords, damaged RAM, dead motherboard battery, or even a damaged power supply. Let’s consider the causes and solutions to these kinds of problems.
The RAM cards may encounter certain issues with reading and writing.
This can cause your Dell monitor to freeze in the Power saving mode. To solve this, remove each of the memory modules. If, after removing the RAMs you hear a beeping sound then the motherboard is good to go. This way, you can tell that the motherboard is fine and the RAMs are faulty.
Dying Motherboard Battery (CMOS battery).
As we’ve earlier explained, if you have an older model Dell desktop computer, then it’s possible that your monitor will get stuck in the power saving mode because of a drained CMOS battery due to overuse and prolonged usage. To solve this, replace the old CMOS battery with a new battery.
Loose Video Cables.
This can make lead to the monitor being disconnected from the main computer system. Consequently, the Dell monitor can easily get stuck in power save mode. As a solution, change the old video chords and connect new ones.
Another main reason why a Dell monitor remains stuck in the Power Saving mode can be because of the settings. So, in both the Plugged in and Battery modes, you need to modify the Power saving Settings to Never.
My Second Monitor Is Stuck in Power-saving Mode
The second monitor can be stuck in the power saving mode due to issues with incompatible drivers or display drivers. Here are some fail-proof procedures to solve this issue below.
- Switch off your Dell computer and disconnect the second monitor.
- With a Device Driver Uninstaller, uninstall every display driver. Typically, you use this to discover and erase every faulty driver seamlessly.
- After you’re done with the uninstallation, download all recent drivers for your graphics card provider’s official website. Then, install them correctly and connect the second monitor back.
- Power on your computer and log in if there’s any security.
- Then, navigate to the Start Menu and open the Control Panel. After that, click on the Power options, and it will open another window for you. Modify the option given from Battery Saver to High-Performance When you’re done changing it, click on the Apply option and then the Ok button to get out of there.
Following these procedures, you will be able to fix the issue with your second monitor freezing in the power-saving mode.
As we’ve said earlier, if your Dell monitor keeps going to power save mode, then there’s a higher possibility that the fault is from the CMOS battery. So, you might need to consider replacing the CMOS battery. Also, ensure that the other components are working correctly.
I am a professional laptop and computer troubleshooter, tech editor who loves to talk about technology and software. My passion is electronics devices. Follow me on social media.More Posts